Black Box KV150A-R2 Bedienungsanleitung PDF herunterladen (Seite 60)

CHAPTER 6: Planning and Installing an Expanded System (Optional)

3. Choose a unique unit address and set the DIP switch for that address; refer to Table 6-1 for addresses up to

16 decimal or Appendix C for higher addresses.

Table 6-1. DIP-switch settings for unit addresses.

Unit Settings* of Unit Settings* of

Address Switch Positions Address Switch Positions

8 7 6 5 4 3 2 1 8 7 6 5 4 3 2 1

1 0 0 0 0 0 0 0 1 9 0 0 0 0 1 0 0 1

2 0 0 0 0 0 0 1 0 10 0 0 0 0 1 0 1 0

3 0 0 0 0 0 0 1 1 11 0 0 0 0 1 0 1 1

4 0 0 0 0 0 1 0 0 12 0 0 0 0 1 1 0 0

5 0 0 0 0 0 1 0 1 13 0 0 0 0 1 1 0 1

6 0 0 0 0 0 1 1 0 14 0 0 0 0 1 1 1 0

7 0 0 0 0 0 1 1 1 15 0 0 0 0 1 1 1 1

8 0 0 0 0 1 0 0 0 16 0 0 0 1 0 0 0 0

*“0” = OFF, “1” = ON.

4. Configure the rest of the Transmit Cards you’ll be installing in this specific ServSwitch Multi unit with the

same address.

5. Set these Transmit Cards beside their ServSwitch Multi unit. Gather together all of the Transmit Cards that

will be installed in the next ServSwitch Multi unit, and repeat steps 2 through 5 until you have reached the

last ServSwitch Multi unit in your system.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 159 160

Keine Kommentare

Black Box KV150A-R2 Bedienungsanleitung Seite 60