Black Box AC1131A Bedienungsanleitung PDF herunterladen (Seite 35)

Page 35

Chapter 6: Web Management

< Auto-Configuration Network Setup>

The default setting of the WVPS box is DHCP client. When the box is connected to a LAN that already has a DHCP server present,

the WVPS box takes an IP address assigned to it by the server. When the WVPS box is connected to a LAN that does not have a

DHCP server, the WVPS box becomes the DHCP server in the network.

< IP Setup>

Select “Obtain IP address automatically” or “Use the following IP address.”

• IP Address: The default value is 192.168.100.10.

• Subnet Mask: The default value is 255.255.255.0.

• Default Gateway: The default value is 192.168.100.10.

• Select auto (Enable/Disable DHCP Server) or Disable.

• Start IP: The start IP address of DHCP Server.

• End IP: The end IP address of DHCP Server.

< Wireless Setup>

• Region: Default value is “Worldwide.”

• SSID: SSID string. Maximum length is 32 bytes.

• Channel: You can set a fixed channel or choose Auto. If you select “Auto,” after you power on the WVPS, it will scan all wire-

less channels and select a clear channel automatically.

• WEP: You can click Disable WEP key or select 64 bit or 128 bit in ASCII or HEX string.

• Key: If WEP is enabled, set the key value according to the WEP mode you selected.

< Gatekeeper>

Gatekeeper ensures network security within the WVPS box.

• All Block can block Guest Users (through wireless) from accessing all office networks (LANs).

• All Allow can pass Guest Users (through wireless) to access all office networks.

• Internet Only can block Guest Users (through wireless) from an office network (LAN) but still reserve internet connection

capability.

<Apply >: Press button to select this mode.

<Cancel>: Press button to abort action.

<Back>: Back to Operating mode main menu.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 41 42

Keine Kommentare

Black Box AC1131A Bedienungsanleitung Seite 35