Black Box ACU5010A Spezifikationen PDF herunterladen (Seite 42)

ServSwitch Uno/Duo USB Installation and Use Page 41

4. Using the ServSwitch Uno/Duo USB

This section explains the general operation of the ServSwitch Uno/Duo USB. We

recommend that you read this section before starting to use the product.

4.1 Rear panel special function switches

Before powering on the ServSwitch ensure that the two option switches on the rear

are set to the OFF (up) position. Option switch 1 is reserved for future use and

option switch 2 is used to enable firmware upgrades (see section 5).

4.2 Power supply connections and indicators

Plug the power adapter into the power inlet. The power indicator on the front of the

ServSwitch (see figure 1) monitors the voltage that is being supplied to the power

inlet. If the power indicator is illuminated then a healthy power adapter is connected.

4.3 USER display and key switch (Duo USB)

The USER key selects the user port that is shown on the green USER display (see

figure 1). Pressing the key will cause the green display to change to the next user

port in numerical sequence. When the USER display is changed, the red

COMPUTER display will also change to show the current connection status of the

new user port. ServSwitch Duo USB models have 2 user ports.

USER LOGOUT switch and display (Uno USB)

The USER LOGOUT key logs out the current user and locks the Uno (if security has

been enabled). In normal operation the green display will show “1”. When the Uno is

locked awaiting a user to login the green display will show “L”.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 81 82

Keine Kommentare

Black Box ACU5010A Spezifikationen Seite 42