Black Box Wizard DVI SRX Betriebsanweisung PDF herunterladen (Seite 9)



F









Performing upgrades

The DVI SRX modules are fully upgradeable via ﬂash upgrades in order to take

advantage of our continual drive to improve products. Such upgrades require

a Windows-based computer system to be linked via the special upgrade port

located on the remote module.

The upgrade process is handled by the KVM Firmware Uploader utility, which is

available from Black Box and allows you to check the current revision of the DVI

SRX modules.

Items required to use the upgrade utility

• Optional serial upgrade cable.

• A Windows-based upgrade computer with an RS232 serial port.

• The latest version of the KVM Firmware Uploader and ﬁrmware ﬁles for the

DVI SRX - Contact Black Box technical support for details.

To use the KVM Firmware Uploader utility

1 - Obtain and run the KVM Firmware Uploader.

Download the latest DVI SRX KVM Firmware Uploader (contact Black Box

technical support) and install it on a Windows-based upgrade computer that

will be connected to the DVI SRX remote module. The ﬁles are supplied as a

compressed ZIP ﬁle. Decompress the ZIP ﬁle with an appropriate tool such as

WinZip (www.winzip.com) and copy all contained ﬁles to the same folder on

the upgrade computer.

2 - Connect the DVI SRX remote module to the serial port of the computer

With power removed from the remote module, attach the small RJ-9

connector of the optional upgrade cable to the UPG socket, located between

the USB and power sockets. Connect the other end of the cable to a vacant

serial port of the upgrade computer.

BLACK

BOX

UPGRADE

REM

Note: There is no

need to change the

serial port settings

of the upgrade

computer, this

will be handled

by the KVM

Firmware Uploader

application.

3 - Ensure that the local module is connected to the remote module

In the normal manner, check that the local and remote modules are

connected using a suitable link cable.

Note: During the upgrade process, both modules require power. The local

module can either be powered via its USB socket from an active computer,

or by using another standard power supply, similar to the one used by the

remote module.

4 - Invoke upgrade mode and power on the modules

Move switch 1 on the remote

module to the ON position - all

other switches on this module and

all switches on the local module

should remain OFF. Power up both

modules as well as the upgrade

computer.

Optional serial

upgrade cable

724-746-5500

5 - Run the KVM Firmware Uploader utility

From that folder, select the KVMUploader icon to run the upgrade utility.

The KVM Firmware Uploader dialog will be displayed:

Set remote module

switch 1 to ON

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

Kommentare zu diesen Handbüchern

Keine Kommentare

Black Box Wizard DVI SRX Betriebsanweisung Seite 9

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für KVM-Schalter Black Box Wizard DVI SRX