Black Box A/C-7P Bedienungsanleitung PDF herunterladen (Seite 110)

111

A/C-7P RO, A/C-7S RO

3. Send that command to the

printer (press the Print Screen

Button or print the

document/file that contains the

Host/PC download command).

4. Send the host data in question to

the printer.

5. To stop the EBCDIC hex dump,

type “&%Z42,2” on the screen,

then send it to the printer (press

the Print Screen Button or print

the document/file that contains

the Host/PC download

command).

Start the EBCDIC hex dump from

the A/C-7 RO’s front panel as

follows:

1. With the A/C-7 RO powered on,

set configuration switch SW1:1

(far left) to “o”, and switch

SW1:8 (far right of first switch

bank) to “|”. The A/C-7 RO is

now in buffer print mode.

2. Return configuration switch

SW1:8 to the “o” position after

printing is completed.

7.3 ASCII Hex Dump

The A/C-7 RO can be set up to print

the buffer in hexadecimal ASCII

code. This differs from the EBCDIC

hex dump in that the buffer is first

translated into ASCII code before it

is printed. This can be useful to

diagnose problems with the interface

or the printer. The ASCII Hex

Dump can only be started through

the A/C-7 RO’s configuration

switches. To start the ASCII Hex

Dump:

1. Locate configuration switches

SW1:4, SW1:5, SW1:6, and SW1:7

on the first switch bank.

2. Write down their current

position (“o” or “|”).

3. With the A/C-7 RO powered on,

set the configuration switches

SW1:4, SW1:5, SW1:6, and SW1:7

to “|”. The A/C-7 RO is now in

ASCII Hex Dump mode.

4. To end ASCII Hex Dump mode,

return the switches to their

original position (see Step 2).

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 148 149

Kommentare zu diesen Handbüchern

Keine Kommentare