Black Box AC401A Spezifikationen

AC401 Battery Powered Changer Operations Manual For more information visit www.Gumball.com | 800-260-0010 | +1-214-550-5079

11 Bill Validator Configuration Detailed instructions for configuring the Bill Validator can be found in the Bil

12 3. Press the hopper’s Pushbutton, located in the top right corner of the front side, once. The hopper’s red Indicator LED

13 To Program A Coin/Token For Acceptance Only ONE coin can be programmed into each “window” of the C

14 6. Press the Program Button once; the LED should return to flashing yellow only. 7. Return the Rotary Switch to position

15 3. Remove the Battery Hopper from the cabinet by sliding it forward slowly, while applying gentle upward pr

16 SECTION B PARTS LIST PARTS LIST FOR THE AC401/AC401-COIN CHANGERS Main Parts AC4041 - ACC Battery Hopper AC400.3 -

3 Specifications Operating voltage 12VDC Battery type Sealed Lead-Acid Power consumption Operating maximum

4 Table of Contents SECTION A: SET-UP & INSTALLATION

5 SECTION A SETUP & INSTALLATION Setup 1. Fully unpack all of the boxes that accompany this changer. This should incl

6Charging the Battery When your AC401 arrives from the factory, the 12V Sealed Lead Acid (SLA) battery supplied with the uni

7 Battery Specifications NOTE: Both of the chargers supplied by American Changer fully confo

8Hopper Removal, Filling, and Replacement 1. Before removing the hopper from the cabinet, turn off the power by

9Pushbutton The Pushbutton on the Battery Hopper is used for several purposes. It is used primarily to contr

10 Functional Description There are three primary parts inside of the AC401 changer. These are the Bill Validator or Coin Ac