12812 1.
16 lobe ports in a single
1U-high chassis.
Port reset button.
Port status LEDs.
Can be flush- or recessed-
rack-mounted, wall- or shelf-
mounted with hardware
(included).
Ring In, Ring Out auto
wrap.
Lobe ports are shielded
RJ-45 connectors.
T
he 16-Port Type 3 MAU
provides additional ports
for high-density wiring
closets. This MAU does not
require AC power and also
does not require the use of an
insertion tool during
installation.
In comparison to using two
8-port MAUs, the 16-port
MAU costs less. Also, you
only use half of the rack space
of common 8-port MAUs.
Since no AC power is
required, the MAU provides
flexibility in the choice of
where to locate the wiring
installation, which may be
non-air-conditioned areas,
such as warehouses and
closets.
A long-life lithium battery
provides power to a circuit
that allows the manual reset of
all lobe circuits. You simply
press a button to reset the
ports. This eliminates the
need for an insertion tool
during installation.
Connect three MAUs together via Ring In and Ring Out to
form a main ring. Add workstations to the ring via lobe port
connections.
This nonpowered
MAU gives you 16
ports, and fits in the
rack space of an 8-port
MAU.
Typical Application
Status LEDs are powered
by the attaching Token Ring
adapters, and provide a visual
indication of connect status.
The MAU automatically
detects the removal of a cable
and wraps the Ring In or Ring
Out port—so there’s no
network downtime!
Shielded RJ-45 connectors
on the lobe ports provide
support for UTP or STP 100-
ohm cable. Use UTP cabling
for much less cost than STP
cabling. Or use 100-ohm STP
cabling if you require greater
distances.
Key Features
And the MAU operates at 4
or 16 Mbps. No configuration
switches are required.
You choose the mounting
method you prefer—flush or
recessed rack-mount, wall- or
shelf-mounted—and the
hardware’s included with the
MAU.
16-Port Type 3 MAU
Kommentare zu diesen Handbüchern