Black Box V5.1 Anleitung zur Fehlerbehebung PDF herunterladen (Seite 10)

Euro MotoElectrics, 25958 Genesee Trail Road PMB 321 Golden, Colorado USA 80401 EDL-IGN Page 10 of 43

www.EuroMotoElectrics.com info@euromotoelectrics.com Tel: 1-303-526-0901

EnDuraSpark Electronic Ignition

Installation & Troubleshooting v5.1

With a 4mm Allen wrench, slightly loosen all three stator housing bolts holding the

EnDuraLast stator to the timing case. Be careful not to bump or knock the stator

once it is loosened.

Completely remove the top and right stator bolts as indicated.

Step 10: Install Trigger

Wheel Hub

Slide the trigger unit (part #2) under the heavy

black alternator cable onto the stator ring

frame, re-insert bolts.

Tighten all three stator housing bolts with a

torque wrench with a 4 mm Allen bit to 3 ft-lbs

(36 inch-lbs).

Don’t over tighten! These are steel bolts going

into an aluminum timing cover which can strip

easily.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 42 43

Keine Kommentare

Black Box V5.1 Anleitung zur Fehlerbehebung Seite 10