Black Box iCOMPEL OPS Series Spezifikationen PDF herunterladen (Seite 123)

724-746-5500 | blackbox.com 123

Setup

Rebroadcaster Settings:

To configure rebroadcasting, complete the following information then click the

button:

Enabled

Check the Rebroadcast a Digital Station option to enable rebroadcasting. If you enable it, the iCOMPEL TV

card is disabled for analog TV, digital TV and radio, and Composite and S-Video capture.

Station

Check the TV or Radio option and select the station from the drop-down list.

Stream As

Enter a descriptive name for the station. This is the name that is visible in streaming announcements for other

iCOMPEL players to pick up. If you use a generic name, you can configure a different station here and the

other iCOMPEL players will pick it up by referencing the same generic name.

Media Streams

Check the streaming option that best matches your requirements.

Stream Address

Specify the address the client needs to listen to for the broadcast.

Port

Specify the port number the client needs to listen on for the broadcast.

TTL

Enter the number of hops required. For example, 1 means the stream will reach the network. Increase the TTL

by 1 for each multicast router the stream has to pass through.

SAP Address

Enter the address that the iCOMPEL sends SAP announcements to.

Digital Tuning:

If you have completed the tuning process before, the iCOMPEL displays a list of the tuned stations. To audition a station,

click its button (the iCOMPEL auditions it on the screen and stops showing the scheduled layout).

To scan for and tune to digital TV and radio stations, follow these steps:

1. Click the button. The iCOMPEL starts scanning for digital TV and radio stations. This

takes approximately 8 to 20 minutes depending on circumstances. During the process, the iCOMPEL displays a

progress notice on the screen instead of the scheduled layout.

2. After the iCOMPEL completes the scan, click the button to store the channel list or click the

button to revert to a previous channel list.

3. If you wish, click the button to audition any of the new stations on the screen.

Analog Settings:

If you have selected analog stations before, the iCOMPEL displays a list of the stations. To audition a station, click its

button (the iCOMPEL auditions it on the screen and stops showing the scheduled layout). To delete a station, click its

button.

To add a station, follow these steps:

1. Select a channel from the drop-down list.

2. Enter a name to identify in the field next to the list.

1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 160 161

Keine Kommentare

Black Box iCOMPEL OPS Series Spezifikationen Seite 123